BYKM II semiautomatic printing slotting die cuttin

BYKM II Machine Performance It can a compound equipment integrated one-color to five-color printing, slitting, creasing, trimming, slotting, angle-cutting, punching and die cutting on corrugated paperboard at one process, featured with chain board feeding and stable driving. The phase is adjusted manually. All the units can be separated by electrical motor and interlocked pneumatically. The machine is equipped with pneumatic diaphragm pump and automatic circulation ink-supplying. The anilox roller and pattern plate can be lifted or lowered pneumatically. The ink guide system is equipped with automatic idle unit to avoid ink accumulating on the anilox roller when stopping the machine. The electronic counter can preciously control the carton quantity. The slotting cutter is specially designed and made with longer service life. The die cutting rubber roller is fitted with rubber pad repair facility and differential compensating unit.It is means featuring low cost,high efficiency and easy operation. Technical parameters Model900×1600900×1800900×20001200×20001200×24001200×28001300×20001300×25001300×28001600×24001600×28001600×32002000×28002000×25002000×4000Max machine speed (p/min)6060606040Max. paper feeding size (mm)900×1600900×1800900×20001200×20001200×24001200×28001300×20001300×25001300×28001600×24001600×28001600×32002000×28002000×25002000×4000Min paper feeding size (mm)280×600320×650350×685400×750460×850Skip feeding (mm)1100×15001100×17001100×19001400×19001400×23001400×27001500×19001500×24001500×27001800×24001800×28001800×32002200×27002200×34002200×3900Max. printing area(mm)900×1550900×1700900×19001200×19001200×23001200×27001300×19001300×24001300×27001600×23001600×27001600×31002000×27002000×24002000×3900Printing plate thickness (mm)7.27.27.27.27.2Min. slottingspace (mm)Normal knife130×130×130×130160×160×160×160160×160×160×160160×160×160×160160×160×160×160Reverse knife200×60×200×60250×60×250×60 250×60×250×60250×60×250×60250×60×250×60Max. slotting depthmm300400400400450The product specification is subject to amend without any notice in case of technical requirements